Sunday, May 15, 2011

CIGAR BOX GUITAR - Part 6 of 10

Day 6 of my Cigar Box Guitar Project:

Due to the shortness of the fretboard there's a 1" space on the neck where there is no fretboard, so I made a decoration to cover that spot.

This is a dry fit to show what it'll look like in place.

Also I started the tail piece. It L-shaped so it'll fold over the back edge of the box. There are 6 slots in it for the strings.

In the upper right corner of this picture there are some corner brackets. I wanted the lid to be held firmly in place when shut so these will be glued to the 4 inside corners and act as a lip. I believe that'll prevent the lid from shifting around side to side. Otherwise I think the hinges would eventually get wiggly and snap off.

Here's a dry fit for the tail piece and the bridge.

Sometimes when I'm concentrating on a project and I've been in the zone for a while it'll suddenly occur to me something's been gently trying to get my attention. When I look down I see Lucy shaking hands with my foot hoping it would get her a treat. Eventually I'll give her one and she'll be satisfied and flop down to fall asleep again.

Toothpicks were used to attach the tail piece to the body. After the glue dried I cut them off flush.

I glued the neck decoration in place and called it a day. Lucy tried to shake hands with the guitar. I suspect she thought it would give her a treat.
Stay tuned.

4 comments:

  1. KW: Lucy! What an elegant, polite pooch. Nothing garish or overt for Lucy - just a suggestion, via a warm paw shake, that you might give her a treat, if it's not too much trouble.

    Cool cigar box guitar, too. You really are an evil genius.

    ReplyDelete
  2. Mykal when she gives me those eyes it's difficult to resist. If I reeeeally want to resist the temptation I do some simple memory call-backs on what happened to the new carpeting right after it was installed.

    ReplyDelete
  3. I get my fiber by inhaling sawdust

    ReplyDelete

Related Posts with Thumbnails