Saturday, September 18, 2010

BATCAVE PLAQUE

Here's an easy project you can make in a day. A BATCAVE plaque! Woohoo! It looks good hanging in a work shop or den, or under the carport or out in the garage, or in the living room (if you're spouse allows it.)


First I folded a piece of paper in half and drew and cut out half-a-bat. The clunkier you make it the more Sixties-y it will look. I unfolded and traced the bat onto a scrap piece of wood, and cut it out on a band saw.


I sanded the edges a little bit and sprayed it with gloss black enamel paint.


Then I cut out a lettering mask with an Exacto blade. I had to make little triangles with masking tape for holes in the "A" and "B" letters. I was going to paint the letters white but I was out of white spray paint so I used silver. I think silver made it more snazzy, like something on the tv show.
I used a regular sheet of paper since it was easy to cut. Since it was paper and it was flimsy there was some over-spray(under-spray?) under the edges of the letter openings. After I sprayed it the paint absorbed into the paper and curled it so paint was able to get in where it wasn't supposed to. When you paint it you need to be quick. As an alternative you could use something a bit thicker, like a donut box lid, or you could take the time to make little inside-out rolls of tape to hold the mask down to the wood. I was in too big of a hurry and did it the sloppy way. I kind of liked the over-sprayed look though. It seemed industrial.

The thickness isn't really important. This one measures 5/8" thick. Now all it needs is a hook on the back to hang it.


The requirements for this project are:

A piece of wood
Black enamel spray paint
White (or Silver or Yellow) enamel spray paint
A couple pieces of paper for cutting out the bat shape, and the lettering mask
Masking tape
Scissors
A pencil
a band saw
Sand paper
A hook to hang it
A desire to be awesome

9 comments:

  1. Do you have the optional "Bat Poles" (assuming you've got a two-story house) to slide down into your "Bat Cave?" Say, couldn't you get your trusty weiner dog to wear an ACE, the Bathound mask?
    best,
    r/e
    p.s. This project is WONDERFUL Keith, thanks for sharing it with us.

    ReplyDelete
  2. Batpoles would definitely be a great thing to have in a 2 story house. The sliding down part would be easy, but I'm not sure how to do that rocket-blasting upward direction platform. These details should be worked out before we start construction.

    ReplyDelete
  3. Perfect!

    Perhaps there is a market for "ManCave" plaques?
    And what would the shape of "that" look like?

    ReplyDelete
  4. i too have a desire to be awesome!
    really nice opened-book grain pattern on the bare wood. did you think twice about painting it?

    ReplyDelete
  5. Thanks guys! I do hate painting wood. Sometimes though, I just think of it like clay or plastic. It this case I knew I wanted it to be black right from the start so I didn't care what the wood looked like.

    ReplyDelete
  6. I am totally gonna make one for my Man-cave...

    Thanks for the inspo!

    ReplyDelete
  7. Cool! Send a picture when you finish it

    ReplyDelete
  8. where did you get the font for the lettering?

    ReplyDelete
  9. I freehanded them with an X-Acto blade.

    ReplyDelete

Related Posts with Thumbnails